Numerical Study of the Load-Carrying Capacity of Lubricated Parallel Sliding Textured Surfaces including Wall Slip

Tauviqirrahman, M. and Muchammad, M. and Jamari, J. and Schipper, D. J. (2013) Numerical Study of the Load-Carrying Capacity of Lubricated Parallel Sliding Textured Surfaces including Wall Slip. Tribology Transactions, 57 (1). pp. 134-145. ISSN 1040-2004

[img]
Preview
PDF (Artikel Jurnal)
676Kb
[img]
Preview
PDF (Peer Review)
1625Kb
[img]
Preview
PDF (Cek Turnitin)
6Mb

Official URL: https://www.tandfonline.com/doi/abs/10.1080/104020...

Abstract

This article analyzes the combined effect of surface texturing and wall slip on the load-carrying capacity of parallel sliding systems. A new modified Reynolds equation with slip is proposed, based on the critical shear stress model, to reveal the hydrodynamic load-carrying capacity. A range of parameters such as texturing zone, texture cell aspect ratio, critical shear stress, and slip length are analyzed. It is shown that the optimal texturing zone length oscillates around 75% of the slider length. A slight shift of the optimized texturing zone toward the inlet of the contact is observed when the critical shear stress is increased. The numerical analysis also shows that there is a unique threshold value of the critical shear stress for every texture cell aspect ratio.When this ratio is increased, the threshold value increases, thus influencing the slip considerably. Slip has a positive effect on the load-carrying capacity for critical shear stress lower than the threshold value, whereas it has no effect on higher values. It is also found that in comparison with a solely textured surface, the load-carrying capacity of the combined textured/wall slip pattern can be increased by around 300% using the optimized slip parameters

Item Type:Article
Uncontrolled Keywords:Critical Shear Stress; Load-Carrying Capacity; Surface Texturing; Wall Slip
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Faculty of Engineering > Department of Mechanical Engineering
Faculty of Engineering > Department of Mechanical Engineering
ID Code:71675
Deposited By:Mr. Sugeng Priyanto
Deposited On:16 Apr 2019 01:14
Last Modified:26 Aug 2019 11:18

Repository Staff Only: item control page