Investigation of Optimal Proses Parameters in CNC Milling of Insole Shoe Orthotic using Taguchi - Fuzzy Approach

Bawono, B. and Anggoro, P. W. and Tauviqirrahman, M. and Jamari, J. and Bayuseno, A.P. (2017) Investigation of Optimal Proses Parameters in CNC Milling of Insole Shoe Orthotic using Taguchi - Fuzzy Approach. International Journal of Applied Engineering Research, 12 (19). pp. 8723-8726. ISSN 0973-4562

[img]
Preview
PDF (Artikel Jurnal)
255Kb
[img]
Preview
PDF (Peer review)
1799Kb
[img]
Preview
PDF (Cek Turnitin)
2011Kb

Official URL: http://www.ripublication.com/ijaer17/ijaerv12n19_9...

Abstract

The surface quality and processing time for insole shoe orthotic (iso) made from EVA rubber foam (erf) is highly dependent on the input machining strategies during a CNC milling process. This paper aims to clarify the application of Fuzzy Logic integrated with the Taguchi method to minimize the surface roughness and maximize Material Removal Rate (MaRR) that for iso product with erf based on CNC Rolland Modella machines. In this research, the input parameters specified are feed, DOC, and the composition of erf. In Taguchi method, orthogonal array design L824 which consists of three factors and mix level and S/N will be calculated. S/N ratio of roughness and MaRR will be entered into the system of fuzzy logic and output received is multi response performance index (MRPI) with application ANOVA, DOC and feeds. Based on the result, it can be concluded that the optimal level for Erf is level 2 (3rd Slice), feed is level 2 (2000 mm/min) and DOC is level 1 (2.5 mm) with the Ra=9.679 μm and MaRR=61,200,000 mm3/min.

Item Type:Article
Uncontrolled Keywords:EVA rubber foam (erf), fuzzy logic, Material Removal Rate (MaRR), orthotic insole shoe, surface roughness
Subjects:T Technology > TS Manufactures
Divisions:Faculty of Engineering > Department of Mechanical Engineering
Faculty of Engineering > Department of Mechanical Engineering
ID Code:71658
Deposited By:Mr. Sugeng Priyanto
Deposited On:15 Apr 2019 20:12
Last Modified:26 Aug 2019 10:29

Repository Staff Only: item control page