Utilization of Coal Fly Ash as Co Gas Adsorbent

Ayu , Lasryza and Dyah , Sawitri (2012) Utilization of Coal Fly Ash as Co Gas Adsorbent. In: International Conference on Chemical and Material Engineering 2012. ISBN : 978-602-097-281-7, September 12 – 13, 2012, , Grand Candi Hotel, Semarang Indonesia.

[img]
Preview
PDF - Published Version
664Kb

Abstract

This research focused on coal fly ash fabricated as CO adsorbent. Coal fly ash having grain size of 325 mesh was characterized by XRF, XRD and SEM-EDX. Physical activation was done at temperatures of 5000C, 5200C, 5400C, 5600C, 5800C and 6000C. Chemical activation was undertaken by mixing between fly ash and NaOH with mass ratio of 1: 1.2 with subsequent heating at 7500C for 1 h and followed by washing the specimens until pH=7. The samples were dried at 1000C for 1 h. The major constituents of unactivated coal fly ash are Fe, Ca, K, Si and Al in the form of quatz and anorthite. The chemical activation led to reduce the amount of quartz or increase the amount of anorthite. Physical activation does not affect the amount of minerals.

Item Type:Conference or Workshop Item (Paper)
Uncontrolled Keywords:adsorbent, activation, characterization, fly ash
Subjects:T Technology > TP Chemical technology
Divisions:UNDIP Conference/Seminar > International Conference on Chemical and Material Engineering 2012
Faculty of Engineering > Department of Chemical Engineering
Faculty of Engineering > Department of Chemical Engineering
ID Code:36975
Deposited By:teknik kimia
Deposited On:16 Nov 2012 23:22
Last Modified:16 Nov 2012 23:22

Repository Staff Only: item control page